Hobart LXGEPR-2 Advansys PuriRinse Low Temperature Glass Washer

The all-new Advansys™ LXGe glass washers clean and sanitize glassware with no chemical residue. The Hobart LXGePR-2 is Energy Star Qualified with easy, one-button operation and a special "Soft Start" feature that helps protect glasses from chipping and breaking.

The Hobart LXGePR-2 uses the Puri Rinse system. The Puri Rinse system uses potable water to rinse off sanitizers. It is Energy Star Qualified with 1.14 gallons of water per rack. This unit stands on 6" legs.

Features and Benefits:

• Design: Front opening, equipped for installation in either free-standing or undercounter-type operations
• Construction: 300 series stainless steel tank, door, and top panel
• Pump: Centrifugal-type, integral with motor, horizontally mounted. Pump capacity 38 GPM.
• Motor: Single phase, furnished for all electrical specifications. Factory-sealed lubrication. Inherent overload protection with auto reset.
• Wash & Rinse Cycle: Complete automatic type, controlled by solid-state electronics. The cycle may be interrupted at any time by opening the door. The cycle continues when the door is closed.
• Rinse & Sanitation: Sanitation is accomplished by injection of the proper amount of liquid bleach into final rinse water to achieve a minimum of 50PPM sanitizing solution. Liquid bleach is injected through a built-in sanitizing chemical pump. The minimum required hot water temperature is 120°F. A potable water rinse to remove chemical residue. To be used with sanitizer approved for use with post-sanitizing rinse.
• Racking: Machines accommodate racks from 10" x 20" to 20" x 20".

Specifications:

• Model: LXGePR-2
• Dimensions: 34.38" H x 23.94" W x 25.56" D
• Weight: 170 lbs.
• Electrical: 120/60/1, 15.4 Amps
• cULus, NSF, Energy Star