Beverage Air SPED60HC-08-4 Elite Series 60" Sandwich / Salad Top Refrigerated Counter

The Beverage Air SPED60HC-08-4 is an all-around prep table features enhanced refrigeration system. Improved airflow for less temperature gradient and uniform temperature distribution throughout the cabinet. Pans are cooled from the bottom, eliminating the necessity of air blanket. Airflow assures that product in open containers is kept below 41°F and above freezing. This translates into increased product shelf life, higher quality food, better food appearance, fresher product and a reduction of bacteria build-up to combat food-borne illnesses.

Exterior construction includes heavy-duty stainless steel finish on front, sides, top, drawers and grille. Removable hoods and insulated lid assemblies are made of matching stainless steel. Cabinet back and bottom are constructed of galvanized steel. Interior liner is made of aluminum for superior resistance to corrosion. In cabinets with doors and drawers, doors are mounted to face of cabinet on cartridge-style hinges permitting them to self close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service and cleaning if required. A plug-in type vinyl magnetic gasket is attached to each door for positive seal.

Drawer frames are constructed of heavy-duty stainless steel and are supported on heavy-duty telescoping drawer slides for maximum support of stored food products. Slides have a locking mechanism to prevent from drawers being pulled off of cabinets. Upper pull-out drawers accommodate 4” deep pans. Lower pull-out drawers accommodate up to 6” deep pans. Heavy-duty pan divider supports are supplied. Foodservice pans for drawers are not included. Snap-type vinyl magnetic gasket is attached to each drawer for positive seal. Top drawer extends 17 3/4” (when opened) and bottom drawer extends 15 3/4” (when opened).

Cabinet insulation is CFC and HCFC-free foamed-in-place polyurethane of two-inch minimum thickness. Six-inch casters, 2 with brakes, are standard. Legs are available as an option. Cutting board supplied with cabinet is 10” wide constructed of high-density white polyethylene plastic. It is readily removable for cleaning. Pans furnished for top are 4” deep and made of polycarbonate plastic.

The SPED60HC-08-4 More robust refrigeration system provides added capacity and efficiency. Systems are designed using CFC and HCFC-free R290 refrigerant. Recirculated, forced air from evaporator is moved under pans, which are recessed 2” from top of cabinet. Forced air over the condenser is drawn through grille under bottom drawer as well as the back and bottom of cabinet. Automatic condensate evaporator is provided to eliminate the need of floor drains.

• Length Overall: 60" / 1524 mm
• Depth Overall: 29-1/4" / 743 mm
• Height Overall: 41-11/16" / 1059 mm
• Number Of Drawers: 4
• Number Of Doors: 0
• Top Drawer Extention (When Opened): 17-3/4"
• Bottom Drawer Extention (When Opened): 15-3/4"
• Net Capacity (cu. ft. / liters): 17.1 / 484
• Internal Length: 56" / 1422 mm
• Internal Depth: 19" / 483 mm
• Internal Height: 23" / 584 mm
• Number Of Pans: 8
• Full Load Amperers 115/60/1: 9.6
• Horsepwer: 1/3

Warranty: 3 Years Parts & Labor & Additional 2 Years On Compressor