Beverage Air SPE72HC-18 Elite Series 72" Three-Section Sandwich Prep

The Beverage Air SPE72HC-18 Is an all-around prep table with the enhanced refrigeration system and new and improved grille system for better airflow and less temperature gradient. Improved design provides better airflow management and uniform temperature distribution throughout the cabinet. Pans are cooled from the bottom, eliminating the necessity of air blanket. Airflow assures that product in open containers is kept below 41°F and above freezing. This translates into increased product shelf life, higher quality food, better food appearance, fresher product and a reduction of bacteria build-up to combat food-borne illnesses.

Exterior construction includes heavy-duty stainless steel finish on the front, sides, top, door(s) and grille. Removable hoods and insulated lid assemblies are made of matching stainless steel. Cabinet back and bottom are constructed of galvanized steel. Interior liner is made of aluminum for superior resistance to corrosion. Doors are mounted to face of the cabinet on cartridge style hinges permitting them to self close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service and cleaning if required. A plug-in type vinyl magnetic gasket is attached to each door for positive seal. The door handle is made from extruded aluminum with a black anodized finish. It is contoured to permit easy opening of doors with fingers from both top and bottom of the handle. Cabinet insulation is CFC free foamed-in-place polyurethane of two-inch minimum thickness. Six-inch casters, 2 with brakes, are standard. Legs are available as an option.

The SPE72HC-18 has a cutting board supplied with a cabinet that is 10” wide constructed of high-density white polyethylene plastic. It is readily removable for cleaning. Two epoxy-coated steel wire shelves are supplied as standard. Pans furnished are 4” deep and made of polycarbonate plastic. More robust refrigeration system provides added capacity and efficiency. Systems are designed using CFC free R290 refrigerant and capillary tube between condenser and evaporator. Recirculated, forced air from evaporator is moved under pans, which are recessed 2” from top of cabinet. Forced air over the condenser is drawn through the grille under the door as well as the back and bottom of the cabinet. Automatic condensate evaporator is provided to eliminate the need of floor drains.

• Length Overall: 72" / 1829 mm
• Depth Overall: 29-1/4" / 743 mm
• Height Overall: 41-11/16" / 1059 mm
• Number Of Doors: 3
• Depth With Door Open 90°: 51"
• Clear Door Opening: 19-1/2" x 21-1/2"
• Net Capacity (cu. ft. / liters): 21.5 / 609
• Internal Length: 68" / 1727 mm
• Internal Depth: 19" / 483 mm
• Internal Height: 23" / 584 mm
• Number Of Shelves: 6
• Pan Capacity: 18
• Full Load Amperers 115/60/1: 9.6
• Energy Consumption: 4.4 kWH
• Horsepwer: 1/3

Warranty: 3 Years Parts & Labor & Additional 2 Years On Compressor