Beverage Air DP72HC 72" Refrigerated Counter Pizza Prep Table

The Beverage Air DP72HC all-purpose “raised rail,” Deli/Pizza Prep Table assures that condiments are held below 41°F and above freezing. It eliminates any chance of freezing product with lids open or closed and prevents unsanitary defrosting associated with the cold wall, and refrigerated rails. Exterior construction includes heavy-duty stainless steel finish on the front, sides, top, door(s), and grille. Insulated lid assemblies are made of matching stainless steel. The cabinet back and bottom are constructed of galvanized steel. The interior liner is made of aluminum for superior resistance to corrosion. Doors are mounted to the face of the cabinet on cartridge-style hinges permitting them to self-close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service and cleaning if required. A plug-in-type vinyl magnetic gasket is attached to each door for a positive seal. The door handle is made from extruded aluminum with a black anodized finish. It is contoured to permit easy opening of doors with fingers from both the top and bottom of the handle. Cabinet insulation is CFC-free foamed-in-place polyurethane of two-inch minimum thickness. Three-inch casters, 2 with brakes, are standard. Six-inch casters or legs are optional. The cutting board supplied with the cabinet is 19” wide and constructed of high-density white polyethylene plastic. It is readily removable for cleaning. Two epoxy-coated steel wire shelves are supplied behind each door as standard. Units will accept pans up to 6” deep. Pans are not included.

The DP72HC refrigeration systems are designed using CFC-free R290 refrigerant and a capillary tube between the condenser and evaporator. Recirculated, forced air from the evaporator is discharged 3 ways. Slightly over and mostly under pans which are recessed approximately 3” from the top of the raised rail, and into the cabinet directly. Coils are plastic coated for maximum corrosion protection. An automatic condensate evaporator is provided to eliminate the need for floor drains.

Features & Benefits

• Cabinet Construction:
• Stainless steel front, sides, top, doors, and grille (galvanized back & bottom)
• Interior liner is made of corrosion resistant aluminum
• Aluminum top interior liner prevents spill from falling into cabinet
• Stainless steel top
• Removable hoods and insulated lid assemblies are made of matching stainless steel
• Self-closing doors with 120˚ stay-open feature, on lift-off hinges
• Snap-in door gaskets
• Easy lift-off door removal for service and cleaning
• Field reversible door
• 3" Casters, 2 with brakes standard
• 19” Wide reversible cutting board constructed of white polyethylene plastic
• Cutting board removable for cleaning
• Four (4) epoxy-coated steel wire shelves
• Units will accept pans up to 6" deep (pans are not included)
• Compressor available on left or right, specify at time of unit order
• Refrigeration System
• Uses environmentally friendly, energy efficient R290 refrigerant, and meets all regulatory requirements for CARB, SNAP, DOE & more
• Adaptive defrost
• Epoxy-coated evaporator coil
• Enhanced airflow maintains temperatures between 36º - 38ºF

Specifications

• Width Overall: 72"
• Depth Overall with Cutting Board: 37"
• Height Overall with Casters & Lid Open: 53-1/2"
• Number of Doors: 2
• Depth with Door Open 90°: 55-1/8"
• Door Openings: 21-5/8" x 23-5/8"
• Depth, Cutting Board: 19"
• NET Capacity (cubic ft): 21.87
• Internal Width Overall: 68"
• Internal Width Useable: 53"
• Internal Depth Overall: 26"
• Internal Height Overall: 23-7/8"
• Number of Shelves: 4
• Full Load Amperes: 4.5
• Horsepower: 1/2
• Capacity (BTU/Hr): 2940
• Heat Rejection (BTU/Hr): 4410
• Charge (lbs/grams): 0.231 / 105
• Crated Weight: 470 lbs
• Crated Height: 49"
• Crated Width: 78"
• Crated Depth: 37"
• Warranty: 3 Years Parts and Labor, 7 Year Compressor Warranty