Beverage Air WTFCS36HC 36" Freezer Chef Base Worktop Cook Stand

The Beverage Air WTFCS36HC cook stand refrigerator is designed to accommodate countertop cooking equipment and feature a full marine drip-guard to prevent spills from dripping over the edge.  WTRCS36 Series models are available in 2 top configurations (36” Width & 48” width) to provide the flexibility in your workspace.  Refrigerated drawers provide ample food product storage.  Working height of 26 3/4” on heavy-duty six-inch (6”) casters.  Heavy-duty construction with 12 gauge stainless steel on top, front, sides, rear and drip guard top. Interior of cabinet is constructed of corrosion-resistant stainless steel. Drawers are equipped with heavy-duty workflow handle. Cabinet integrity is reinforced by use of structural columns. Cabinets are insulated with foamed-in-place polyurethane insulation of 2” thickness for added strength and maximum energy efficiency. Cabinet back and bottom are constructed of galvanized steel. Interior cabinet is made of corrosion resistant stainless steel.  WTRCS36-1 standard with marine edge. WTRCS36-1-48 standard with flat top.  Exterior solar digital thermometer with battery backup is standard.

The WTFCS36HC Drawer frames are constructed of heavy-duty, 16 gauge stainless steel and are supported on stainless steel telescoping drawer slides with three stainless steel roller bearing wheels for maximum support of stored food product.  Upper pull-out drawers accommodate two 6” deep 12” x 20” pans of combinations of 1/6 size pans or larger.  Lower pullout drawers accommodate two 4” deep 12” x 20” pans or combinations of 1/6 size pans or larger.  Heavy duty pan divider supports are supplied.  Foodservice pans are not included.  A snap-in type vinyl magnetic gasket is attached to each drawer for positive seal.  The self-contained refrigeration system is metered by a capillary tube system.  Automatic (hot gas) condensate evaporation is provided.  Interior forced air system, with high humidity evaporator coils, provide the ideal environment for food preservation.  Removable front grille allows for easy access to complete lift-out refrigeration system.

Item Details

• Stainless steel front, sides, drawers and grille (galvanized back & bottom)
• Interior liner is made of corrosion resistant aluminum
• Top has full marine edge to prevent spills from dripping over sides
• Full electronic control
• Top weight capacity 1000 lbs
• One-piece, snap-in magnetic drawer gasket
• 12-Gauge stainless steel drawer slides with Delrin rollers rated at 275 lbs
• Lifetime warranty on all drawers and slides
• Heave duty, fire-proof, reinforced insulated 16 gauge top
• No heat shield required (must adhere to proper clearance per owners manual
• Accommodates 6" deep full size food service pans (not included)
• Self-closing drawer feature
• 3" Casters, 2 with brakes standard
• Uses environmentally friendly, energy efficient R290 refrigerant, and meets all regulatory requirements for CARB, SNAP, DOE & more
• Adaptive defrost
• Non-electric defrost with hot gas condensate evaporation
• Freezer capable of maintaining product temperature of -10ºF
• Length Overall:  36" / 914 mm
• Depth Overall:  32" / 813 mm
• Height Overall:  26-3/4" / 680 mm
• Number Of Drawers:  2
• Depth With Drawer Open 90º:  57-1/4"
• Upper Drawer Pans:  (2) 12" x 20" x 6"
• Lower Drawer Pans:  (2) 12" x 20" x 4"
• Top Load Rating:  800 lbs / 363 kg
• Net Capacity (cu. ft. / liters): 8.5 / 241
• Horsepwer:  1/5

Warranty:  3 Years Parts & Labor & Additional 2 Years On Compressor