Cleveland 24CEA10 SteamCraft Gemini 10 Two Section Convection Steamer
Cleveland 24CGA10 SteamCraft Ultra 10 Pressureless Gas Convention Steamer

Cleveland 24CGA10 SteamCraft Ultra 10 Pressureless Gas Convention Steamer

Cleveland (2) 22CET63.1 Electric Boilerless Double Stacked SteamChef

Cleveland (2) 22CET63.1 Electric Boilerless Double Stacked SteamChef

Cleveland 24CEA10 SteamCraft Gemini 10 Two Section Convection Steamer

$19,328.00
In stock
SKU
CL24CEA10

The Cleveland 24CEA10 is a SteamCraft Gemini 10 Two Compartment Floor Model Convection Steamer. It has a cooking capacity for up to ten 12” x 20” x 2 ½” deep cafeteria pans, five in each compartment. It features the innovative PowerPak Gas Steam Generator. Twin vertical atmospheric electrical steam generators operate independently. These generators operate and control their own steam-cooking compartment. Two generator cleaning ports are located on the outside, top of the unit for easy access. The instant steam stand-by mode holds the generator at a steaming temperature and allows the unit to start cooking instantly. The compartment door, cavity, and steam generator are constructed of durable 14 gauge stainless steel. The two-piece compartment door design is cool to the touch. The free floating inner door with reversible gasket provides an air tight seal.

Features and Benefits:

  • Cooking Capacity for up to ten 12" x 20" x 2-1/2" deep Cafeteria Pans, five each compartment.
  • Innovative PowerPak Gas Steam Generator: Twin Vertical Atmospheric Electric Steam Generators operate independently. Two 8 KW Fire Bar Heating Elements per generator. Strong 14 Gauge Stainless Steel Construction. Large 5 gallon generator reservoir for each compartment for high speed steam cooking production. Two fully insulated rear mounted independent steam generators.
  • Each steam-cooking compartment is independently operated and controlled by a separate stainless steel steam generator.
  • Easy Access Cleaning Port: Two Generator Cleaning Ports located on the outside, top of the unit.
  • Instant Steam Stand By Mode: Hold generator at a steaming temperature. Allows unit to start cooking instantly.
  • Durable 14 Gauge, Stainless Steel Construction: For compartment door, cavity and steam generator.
  • Two 60 Minute Electro-Mechanical Timers and Switch for manual operation: Audible signal for cooking time completion. (MCS)
  • Main Power On/Off Switch: Automatically fills generator with water, and then starts heating elements in generator.
  • Exclusive Steam Cooking Distribution System: Exclusive Brass Steam Jets produce a high velocity convection steam without fans. Coved Corner design in cooking compartment distributes heat evenly, and is easy to clean. Creased top & bottom enhance drainage. Cold Water Condenser for each compartment maintains a dry steam. Fully Insulated cooking compartment for thermal efficiency. Removable Stainless Steel Slide Racks.
  • Automatic Generator Drain: Contains a "Water Jet" Spray Rinse Drain Cleaning Cycle to keep drain clear.
  • Exclusive Automatic Probe for Water Level Control: Separate from the generator for easy access, contains a high velocity rinse cycle to eliminate mineral build up.
  • Exclusive "Cool to the Touch" Two-Piece Compartment Door Design: Free floating inner door with reversible gasket provides an air tight seal. Stainless Steel Slam/Latch Door Latch mechanism for reliability.
  • Condensate Drip Trough: Provide under lower compartment door to collect condensate.
  • Left Hand Door Hinging: Compartment door hinged on left, controls on the right.
  • NSF Certified 6" Stainless Steel Legs with adjustable flanged feet for a one inch level adjustment.

Specifications:

  • Total Capacity
    • 10 - 12" x 20" x 2-1/2" Cafeteria Pans or
    • 20 - 12" x 20" x 1" Cafeteria Pans or
    • 6 - 12" x 20" x 4" Cafeteria Pans
  • Utility Connections:
    • Electrical Supply
    • Cold Water Supply for Condenser for 3/8" Dia. NPT
    • Cold Water Supply for Generator and Water Injection. 3/8" Dia. NPT (for water treatment conn.) Unit comes with a 50 Mesh Water Strainer. (Installation required)
    • Drain: 1-1/2" Dia. IPS
    • Inlet for Generator Deliming Solution
  • Electric
    • 208V / 32,600 Watts / 3 PH / 91.7 Amps / 3 Wire
    • 220V / 27,393 Watts / 3 PH / 72.9 Amps / 3 Wire
    • 240V / 32,600 Watts / 3 PH / 79.5 Amps / 3 Wire
    • 440V / 27,393 Watts / 3 PH / 36.4 Amps / 3 Wire
    • 480V / 32,600 Watts / 3 PH / 39.8 Amps / 3 Wire
    • 360V / 29,259 Watts / 3 PH / 47.6 Amps / 4 Wire
    • 380V / 32,600 Watts / 3 PH / 50.2 Amps / 4 Wire
    • 415V / 32,600 Watts / 3 PH / 46.0 Amps / 4 Wire
  • Cold Water: 35 psi min., 60 psi max.
    • 3/8" Dia. NPT for Generator (for water treatment connection)
    • 3/8" Dia. NPT for Condenser
  • Drainage: 1-1/2" Dia.
    • Do not connect any other units to this drain
    • Drain must not be located beneath the steamer itself. Preferred floor drain location should be a minimum distance (from the unit) of at least 12” from the left side, 12" from the right side, 6” from the front and 6" from the rear
    • No PVC pipe for drain.
Write Your Own Review
You're reviewing:Cleveland 24CEA10 SteamCraft Gemini 10 Two Section Convection Steamer
Your Rating