Beverage Air UCRD72AHC-6 72" Undercounter Refrigerated Work Top With Drawers
The Beverage Air UCRD72AHC-6 has a Heavy duty construction that includes exterior stainless steel on front, sides, door(s) and grille. Cabinet back and bottom are galvanized steel. Interior liner is made of corrosion resistant aluminum. Interior thermometer is standard. In cabinets with doors and drawers, doors are mounted to face of the cabinet on cartridge-style hinges permitting them to self close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service and cleaning if required. A plug-in type vinyl magnetic gasket is attached to each door for positive seal. Cabinet insulation is CFC and HCFC-free foamed-in-place polyurethane of two-inch minimum thickness. 6” high casters are standard, 2 include brakes. Drawer frames are constructed of heavy-duty stainless steel and are supported on heavy-duty telescoping drawer slides for maximum support of stored food products. Slides have a locking mechanism to prevent from drawers being pulled off of cabinets. Upper pull-out drawers accommodate 6” deep pans. Lower pull-out drawers accommodate two 4” deep pans. Heavy-duty pan divider supports are supplied. Foodservice pans for drawers are not included. The snap-type vinyl magnetic gasket is attached to each drawer for positive seal. Drawers extend 23” (when opened).
The UCRD72AHC-6 Refrigeration system utilizes R290 refrigerant governed by a capillary tube system. Automatic (non-electric) condensate evaporator is provided. Interior forced-air system with high humidity evaporator coils, provides the ideal environment for food preservation.
- Length Overall: 72" / 1829 mm
- Depth Overall: 29-1/4" / 743 mm
- Height Overall: 34-1/2" / 876 mm
- Number Of Doors: 0
- Number Of Drawers: 6
- Drawer Extension (when opened): 23"
- Net Capacity (cu. ft. / liters): 21.5 / 609
- Internal Length: 68" / 1727 mm
- Internal Depth: 19" / 483 mm
- Internal Height: 23" / 584 mm
- Number Of Shelves: 0
- Full Load Amperes 115/60/1: 8.2
- Horsepower: 1/4
Warranty: 3 Years Parts & Labor & Additional 2 Years On Compressor