Beverage Air SPE36HC-15M-STL Elite Series 36" Two-Section Mega Top Sandwich / Salad Refrigerated Counter
Beverage Air SPED36HC-12M-2 36" Refrigerated Mega Top Sandwich / Salad Prep Table
The Beverage Air SPED36HC-12M-2 has a fifty percent greater pan capacity than the all-around standard prep table. Features enhanced refrigeration system and new and improved grille system for better airflow and less temperature gradient. Improved design provides better airflow management and uniform temperature distribution throughout the cabinet. Pans are cooled from the bottom, eliminating the necessity of air blanket. Airflow assures that product in open containers is kept below 41°F and above freezing. This translates into increased product shelf life, higher quality food, better food appearance, fresher product and a reduction of bacteria build-up to combat food-borne illnesses.
The exterior construction includes heavy-duty stainless steel finish on front, sides, top, drawers and grille. Removable hoods and insulated lid assemblies are made of matching stainless steel. Cabinet back and bottom are constructed of galvanized steel. Interior liner is made of aluminum for superior resistance to corrosion.
Drawer frames are constructed of heavy-duty stainless steel and are supported on heavy-duty telescoping drawer slides for maximum support of stored food products. Slides have a locking mechanism to prevent from drawers being pulled off of cabinets. Upper pull-out drawers accommodate 4” deep pans. Lower pull-out drawers accommodate up to 6” deep pans. Heavy-duty pan divider supports are supplied. Foodservice pans for drawers are not included. The snap-type vinyl magnetic gasket is attached to each drawer for positive seal. Top drawer extends 17 3/4” (when opened) and bottom drawer extends 15 3/4” (when opened).
Cabinet insulation is CFC and HCFC-free foamed-in-place polyurethane of two-inch minimum thickness. Six-inch casters, 2 with brakes, are standard. Legs are available as an option. Cutting board supplied with cabinet is 10” deep constructed of high-density white polyethylene plastic. It is readily removable for cleaning. Pans furnished for top are 4” deep and made of polycarbonate plastic.
The SPED36HC-12M-2 More robust refrigeration system provides added capacity and efficiency. Systems are designed using CFC free R290 refrigerant and capillary tube between condenser and evaporator. Recirculated, forced air from evaporator is moved under pans, which are recessed 2” from top of cabinet. Forced air over the condenser is drawn through grille under door as well as the back and bottom of cabinet. Automatic condensate evaporator is provided to eliminate the need of floor drains.
- Length Overall: 36" / 914 mm
- Depth Overall: 38-5/16" / 973 mm
- Height Overall: 45-9/16" / 1157 mm
- Number Of Doors: 2
- Top Drawer Extension (When Opened): 17-3/4"
- Bottom Drawer Extension (When Opened): 15-3/4"
- Net Capacity (cu. ft. / liters): 10.2 / 289
- Internal Length: 32" / 813 mm
- Internal Depth: 20" / 508 mm
- Internal Height: 18" / 457 mm
- Number Of Shelves: 4
- Number Of Pans: 12
- Full Load Amperers 115/60/1: 5
- Horsepwer: 1/4
Warranty: 3 Years Parts & Labor & Additional 2 Years On Compressor