Beverage Air DPD67HC-4 67" Refrigerated Counter Pizza Prep Table

The Beverage Air DPD67HC-4 all-purpose “raised rail,” Deli/Pizza Prep Table assures that condiments are held below 41°F and above freezing. It eliminates any chance of freezing product with lids/drawers open or closed and prevents unsanitary defrosting associated with the cold wall, and refrigerated rails. Exterior construction includes heavy-duty stainless steel finish on the front, sides, top, door(s), and grille. Insulated lid assemblies are made of matching stainless steel. The cabinet back and bottom are constructed of galvanized steel. The interior liner is made of aluminum for superior resistance to corrosion. In cabinets with doors and drawers, doors are mounted to the face of the cabinet on cartridge-style hinges permitting them to self-close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service and cleaning if required. A plug-in-type vinyl magnetic gasket is attached to each door for a positive seal. Cabinet insulation is CFC and HCFC-free foamed-in-place polyurethane of two-inch minimum thickness. Three-inch casters, 2 with brakes, are standard. Six-inch casters or legs are optional. The cutting board supplied with the cabinet is 19” wide and constructed of high-density white polyethylene plastic. It is readily removable for cleaning. Two epoxy-coated steel wire shelves are supplied behind each door as standard. Units will accept pans up to 6” deep. Pans are not included.

The DPD67HC-4 Drawer frames are constructed of heavy-duty stainless steel. Telescoping design slides make opening drawers smooth and easy. Heavy-duty construction ensures maximum support of stored food products. Slides have a locking mechanism to prevent drawers from being pulled off of cabinets. For your convenience, drawers accommodate 6” or 4” deep pans. Heavy-duty pan divider supports are supplied. Foodservice pans for drawers are not included. Snap-type vinyl magnetic gasket is attached to each drawer for a positive seal. Drawers extend 23” (when opened). Refrigeration systems are designed using CFC and HCFC-free, environment-friendly R290 refrigerant. Optimized air circulation inside the cabinets ensures uniform temperature distribution. Slightly over and mostly under pans which are recessed approximately 3” from the top of the raised rail, and into the cabinet directly. Coils are coated for maximum corrosion protection. The innovative design utilizes an automatic condensate removal process.

Features & Benefits:

• Stainless steel front, sides, top, door, drawers, and grille (galvanized back & bottom)
• Interior liner is made of corrosion-resistant aluminum
• Aluminum top interior liner prevents the spill from falling into cabinet
• Stainless steel top
• Removable hoods and insulated lid assemblies are made of matching stainless steel
• Self-closing door with 120º stay-open feature on cam-lift hinges
• Magnetic gaskets provide a positive seal on both door and drawers
• Field reversible door
• 3” Casters, 2 with brakes standard
• 19” Wide reversible cutting board is removable for easy cleaning
• Two (2) epoxy-coated steel wire shelves
• Units will accept pans up to 6” deep (pans are not included)
• Drawer frames are heavy-duty stainless steel
• 12-Gauge stainless steel drawer slides with Delrin® rollers rated at 275 lbs
• Telescoping slides, with locking mechanism to prevent drawers from being pulled off of cabinet
• Heavy-duty pan-locking divider supports are standard in drawers
• 3 years parts and labor warranty, 7-year compressor warranty
• Uses environmentally friendly, energy efficient R290 refrigerant, and meets all regulatory requirements for CARB, SNAP, DOE & more
• Adaptive defrost
• Epoxy-coated evaporator coil
• Enhanced airflow maintains temperatures between 36º - 38ºF

Specifications

• Length Overall: 67" / 1702 mm
• Depth Overall: 38-3/8" / 975 mm
• Height Overall: 43-3/8" / 1102 mm
• Number Of Doors: 0
• Number Of Drawers: 4
• Drawer Extension (when opened): 23"
• Net Capacity (cu. ft. / liters): 27 / 765
• Internal Length: 48" / 1219 mm
• Internal Depth: 28" / 711 mm
• Internal Height: 24" / 610 mm
• Number Of Shelves: 2
• Full Load Amperers 115/60/1: 6.3
• Energy Consumption: 0.23kWH
• Horsepwer: 1/4